North Pekin, Peoria, Morton, Tremont, Bartonville & surrounding areas
Call 309-267-3646

Fill Dirt

Fill dirt for holes, grading and base fill. This is not clean fill and may contain rocks, concrete chunks or other debris from the ground it came from.

Current price
$20 per ton Plus tax. Delivery pricing is confirmed separately. Confirm availability and final details with the office.
Common uses

Where Fill Dirt usually fits.

Fill Dirt is for volume and grading rather than finish soil. Twin Lake notes that this is not clean fill and it may contain rocks, concrete chunks or other debris from the ground it came from, so it should not be treated like Topsoil.

Filling holes and low areas
Rough grading and shaping
Basic backfill where clean fill is not required
Starting coverage guide

How much might you need?

These figures are here to help you plan. Coverage figures are approved planning estimates. Actual coverage can change with the material, depth, settling, waste and site conditions. The office will confirm the final amount for your project.

250 sq. ft. per ton at 1 inch deep
125 sq. ft. per ton at 2 inches deep
83 sq. ft. per ton at 3 inches deep
63 sq. ft. per ton at 4 inches deep
Pickup & delivery

Need material for rough fill or grading around Peoria?

If you are filling holes, reshaping a grade or building up a low area, send Twin Lake the approximate dimensions and site location. The office can confirm quantity and access, and help you decide whether Fill Dirt or a soil product is the better fit.

Twin Lake Materials is based in North Pekin and serves Peoria, Morton, Tremont, Bartonville and surrounding Central Illinois communities, with delivery available up to approximately 100 miles when the material, load and site access make sense.

Questions about Fill Dirt

What customers usually want to know.

Is Twin Lake’s Fill Dirt clean fill?

No. Twin Lake specifically notes that it is not clean fill and may contain rocks, concrete chunks or other debris from the ground it came from.

When should I use Topsoil instead of Fill Dirt?

Use Topsoil when the finished surface needs usable soil for lawns, gardens or planting. Fill Dirt is intended for holes, rough grading and base fill.

What should I measure for a Fill Dirt project?

Estimate the length, width and depth of the area being filled or graded. Those measurements give the calculator a starting quantity for Twin Lake to confirm.